Thermal transfer ribbon supplier based in Guangdong, China sales@sentuoco.com • WhatsApp +86 18127421920
Thermal transfer ribbon supplier based in Guangdong, China sales@sentuoco.com • WhatsApp +86 18127421920
110mm × 300m Thermal Transfer Ribbons
The search for a thermal transfer ribbon 110mm x 300m usually starts with two physical requirements: a 110mm ribbon width and a 300m ribbon length. Those dimensions are useful inputs, but they do not identify the complete roll or prove that the roll will work in a particular printer. Core size, winding direction, Ink Side, printhead technology, media construction and formulation still need to be checked.
This page helps purchasing teams turn a size request into a specification that can be reviewed. Send the printer model, label or substrate reference, current ribbon information and application conditions. If any value is unknown, mark it for confirmation instead of copying a value from another roll.
What the size does and does not tell you
The width describes the ribbon material across the roll. The length describes the amount of ribbon wound onto it. A request for 110mm x 300m should therefore be recorded exactly as a width and length requirement. It should not be expanded into an assumed core, winding direction, Ink Side or printer fit.
The same dimensions can be used in different equipment and label processes with different mechanical or print conditions. A printer may also require a roll that is narrower than the media, while another setup may use a different winding or sensor arrangement. Confirm the equipment instructions and the current ribbon label before a quotation is treated as complete.
Questions to answer before ordering
Start with the exact printer model and the printhead technology if it is known. Record the printer speed, energy setting and roll path used for the job. Then describe the substrate, coating and label width. Paper, coated paper, film and other media can present different transfer conditions even when the roll dimensions stay the same.
Record the current ribbon reference when one exists. A current roll label may show useful information about width, length, core, winding or Ink Side, but each field still needs to be read from the actual item. Do not infer a missing value from the printer family or the 110mm x 300m search phrase.
Questions to answer before ordering
Start with the exact printer model and the printhead technology if it is known. Record the printer speed, energy setting and roll path used for the job. Then describe the substrate, coating and label width. Paper, coated paper, film and other media can present different transfer conditions even when the roll dimensions stay the same.
Record the current ribbon reference when one exists. A current roll label may show useful information about width, length, core, winding or Ink Side, but each field still needs to be read from the actual item. Do not infer a missing value from the printer family or the 110mm x 300m search phrase.
Ribbon configuration worksheet
Field
Ribbon width
Buyer input
110mm requested; confirm production tolerance
Review status
Size input to verify against the roll
Field
Ribbon length
Buyer input
300m requested; confirm usable length basis
Review status
Size input to verify against the roll
Field
Core
Buyer input
{{CORE_SIZE}}
Review status
Must be confirmed from printer or current roll
Field
Winding direction
Buyer input
{{WINDING_DIRECTION}}
Review status
Must be confirmed from equipment and roll
Field
Ink Side
Buyer input
{{INK_SIDE}}
Review status
Must be confirmed from actual ribbon
Field
Printhead technology
Buyer input
Provide model or technical reference
Review status
Do not infer from dimensions
Field
Media or substrate
Buyer input
Provide label, film, paper or coating reference
Review status
Determines the trial material
Field
Formulation
Buyer input
{{RIBBON_FORMULATION}}
Review status
Candidate family only until tested
Field
Application
Buyer input
Describe content, speed and exposure
Review status
Defines the acceptance check
Field
Quantity and destination
Buyer input
Provide purchasing requirement
Review status
Used for quotation scope
Choosing a formulation for the media
Wax, Wax-Resin and Resin are formulation families that may be considered after the substrate and print conditions are known. A wax ribbon may be evaluated for one paper construction, while a coated or film media may require a different candidate. That does not mean a formulation is automatically suitable because the roll is 110mm x 300m.
If the request mentions a wax resin ribbon 110mmx300mtr or a wax ribbon 110mm x 300m, keep the size and formulation request separate in the brief. Confirm the actual grade, substrate, printer settings and required print result. A size phrase cannot establish resistance, durability, print life or exact compatibility.
Sample qualification
The sample review begins with the worksheet, current ribbon reference and a representative label. We identify missing fields, confirm the printer setup and agree on artwork that reflects production. The sample is printed on the intended substrate using controlled settings. Record the ribbon dimensions, core, winding, Ink Side and formulation as confirmed or open items.
Acceptance criteria should be written before the trial. They may cover readable text, barcode scanning, edge definition, visual consistency and any defined handling or exposure test. The criteria must match the real application. No dimension alone can establish a performance rating or universal printer compatibility.
Sample availability, preparation time and any custom-slitting requirement are confirmed after the complete specification and trial scope have been reviewed. Use the written quotation as the timing reference for the submitted configuration.
Information for an RFQ
Include the requested 110mm width and 300m length, printer model, printhead technology if known, substrate, current ribbon reference, formulation preference, core, winding, Ink Side, quantity and destination. Add artwork and acceptance criteria when print quality or exposure matters. If a field is unknown, leave it open for confirmation.
Frequently asked questions
Does 110mm x 300m fit every printer that accepts a thermal transfer ribbon?
No. The dimensions do not confirm core, winding, Ink Side, printhead technology or the complete printer setup. Check the printer and current roll information, then qualify a sample on the intended media.
Can I choose Wax, Wax-Resin or Resin from the roll size?
No. Formulation selection depends on the substrate, coating, artwork, printer settings and application requirements. Treat the formulation as a candidate for testing until the intended combination is reviewed.
What if I know only the width and length?
Submit the 110mm x 300m request and identify the missing fields. A clear photo of the printer data plate and current ribbon label can help the review, but the values still need confirmation.
Should the ribbon be wider than the label?
The required relationship depends on the printer, media layout and print area. Provide the label width, printable area and printer setup instead of applying a general rule.
What should the sample prove?
The sample should answer the buyer’s written acceptance criteria on the actual substrate and printer. Record readability, scanning and any defined handling test without converting one trial into a universal claim.
Submit the complete roll brief
Use the ribbon size, core and winding guide to organize the physical fields. Compare wax ribbons, wax-resin ribbons and resin ribbons only after the media and application are defined. For printer questions, use the Printer Compatibility Hub and state the exact model. The B2B ribbon supplier process explains quotation inputs, and the sample request provides the next step for a controlled trial.